Description
The rig can be equipped with a remote control (except for the economy of execution), which allows you to control drilling when the driller is in close proximity to the wellhead.
When the rig is equipped with a hydraulic rotary reducer (maximum torque 2000, 4000 N / m), equipped with a drilling fluid supply unit for washing or compressed air supply for work with purge and air hammer is not required.
In the basic configuration, the unit is equipped with a 2-flow hydraulic system, which allows you to independently adjust the force on the face and rotation of the tool.
Carriage feed – on hydraulic cylinder or chain.
The rig can be equipped with a hydraulic auxiliary winch, hydraulic outriggers.
It is possible to increase the mast to work with the pipe up to 3 meters
Specifications
| Parameters | Quantity | |||
| OPERATING | ||||
| Max. initial diamete, mm | 300 (optionally till 800) | |||
| Grade of formation for drilling | 9 (optionally till 12) | |||
| Max drilling depth, m | 100 (optionally till 200) | |||
| Dimensions, mm | ||||
| – Length
– Width – Hight |
700
800 3000 |
|||
| Mass, kg | ||||
| SWIVEL | ||||
| Type | Hydraulic oil motor with mounting group | Reducing gear box | ||
| Rotative moment, (Нм) | 630 (optionally till 1380) | 2000 (optionally till 6000) | ||
| Rotation speed, (sev/min) | ||||
| I gear
II gear |
90 (optionally till 175) | 0-160
0-80 |
||
| MAST | ||||
| Type | Chain drive | Hydrocylinder | ||
| Pulling force, (kg): | ||||
| – up
– down |
5000
3000 |
2000
2000 |
||
| Carriage movement, (mm) | 1000-2200 | 1680, 2200 | ||
| Speed, m/sec | 0,35 | 0,41 | ||
| CHASSIS | ||||
| Type | MTZ | |||
| OPTION MODULE | ||||
| Hydroclamp of drilling pipe | optionally | |||
| Hydroclamp of casing pipe | optionally | |||
| Hydraulic casing oscillator | optionally | |||
| Mechanical outriggers | optionally | |||
| Hydraulic outriggers | optionally | |||
| Wrench | optionally | |||
| Anchoring system | optionally | |||
